Switch 2015+ Boston Valve

FixMyKiteSKU: VA0035-SWS

Price:
Sale price$44.95

Description

Switch Boston Inflate/Deflate Screw Valve by FixMyKite is the perfect 'self-stick replacement for leaking Switch leading-edge valves. This valve is used on 2015 and newer Switch kites, 2011 and newer Liquid Force kites, and Ozone kites.

Backed by Tear-Aid with a 4" Mega-Patch these valves are incredibly durable and will stick directly onto your kite bladder. Everything you need to install the new valve is included in the package, including an alcohol wipe and a link to detailed instructions.

FixMyKite is the global benchmark in 'Self-Stick' valves, trusted every day by professional repairers around the world. When you buy a FixMyKite 'Self-Stick' valve you can be 100% confident you're receiving an original Switch OEM valve backed by Tear-Aid and made by FixMyKite.

NOTE ABOUT BOSTON VALVES ON USED BLADDERS:

  • BOSTON OVERSIZE PATCHES: Depending on how you remove the valve, you may need to place an oversize tear-aid base patch first before installing the new bladder.  This is not needed if installing on to a new FixMyKite Tuff Bladder.

HOW TO REPLACE:

  • VALVE REMOVAL: If replacing the valve, carefully peel off the old valve. If the old valve does peel off, cut around the circumference of the valve to remove.
  • CLEANING: Wipe area where the valve will be placed with a provided alcohol swab. DRY COMPLETELY WITH A CLEAN PAPER TOWEL.
  • PEEL AND STICK: Lay bladder out flat. If possible, have a friend lightly hold the bladder on a table or other smooth even surface. Peel off paper backing, center valve over hole, and place valve on bladder.
  • PRESS: Press valve from center outward to remove air bubbles and ensure proper adhesion and creases.

*PRO TIP - Use a hairdryer to heat the valve especially in cold weather. This makes it easier to remove the valve from the backing paper. After placement of the self-stick valve use the hairdryer again to warm the adhesive. Press the valve from the center out, massaging and stretching creating positive adhesion. Be careful not to overheat the bladder or new valve. Following this method will guarantee your valve sticks in all conditions, and it really helps the Tear-Aid adhesive provide a permanent and lasting repair.

More Information



You may also like

Recently viewed