Skywatch Xplorer 1
Skywatch Xplorer 1 is a handheld anemometer that gives instant windspeed measurement with 'max' speed reached displayed. Used by professional wind, kite, board surfers, sailors, Flybubble paraglider and other general wind sports and observatory.
Free Shipping 99+
Free Shipping 99+
A pocket-sized, rugged, go-anywhere anemometer, the Xplorer 1 is ideal for wind sports enthusiasts. Keep it simple with a wind speed only display which is clear and easy to read on the move.
This windmeter is an extremely accurate way to measure the wind and know exactly what size kite to rig up. Small and compact, the Xplorer 1 is one of the easiest ways to know what the wind is doing before you hit the water
The Skywatch Xplorer 1 Wind Meter is a wind speed device designed with Swiss precision, although small in size, it is not lacking in features. Single button operation allows for easy measurements, and the display has a backlight; handy for low-light conditions.
- Exceptional accuracy in a small package
- Balanced instant wind speed in upper line
- Maximum windspeed in a lower display (reset when turned off)
- LCD backlight with double-press of button
- Stainless steel back
- Waterproof - designed to withstand short-term immersion in water at a depth of up to 1m.
- Replaceable battery
- Reads in MPH, KPH, Knots, feet/second and m/sec
Stainless steel back
Replaceable lithium battery
|Measurement Units||km/h, m/s, mph, fps, knots|
|Operation Temperature||-20°C to 70°C (-4°F to 158°F)|
|Wind Resolution||0.1 unit|
|Wind Measuring Cycle||2 measurements per second|
|Wind Accuracy||±3% up to 94mph|
|Wind Measuring Range||From 0 to 150 km/h|
|Maximum Wind Reading||150 km/h, 42 m/s, 81 knots, 97 mph, 138 fps|
|Dimensions||41 x 93 x 17mm|
*Note:Intensive use of backlight reduces the battery life (consumption approximately 100 times greater than without backlight).