FREE SHIPPINGAll Orders Over $99
0 item in your Cart
Stormcure Accelerator 20ml

Be the first to review this product

$19.95

Availability: In stock

Stormcure by Stormsure is perfect for reducing the curing time of Stormsure adhesives from 12 hours down to 1 - 2 hours. It can be used not just to accelerate drying but also be used to waterproof surfaces quicker. Enjoy your watersports repairs quicker!

Stormcure by Stormsure is perfect for reducing the curing time of Stormsure Adhesives. Use a very small amount, mixing thoroughly with the glue before applying to the surface you wish to glue. You can then add a tiny amount of water (less than 1%) to further reduce the cure time under 1 hour. The mixture will then wick its way into the tiny needle holes and cure inside the thread and blocking the hole.

Get your Stormcure Curing Accelerator Fast Drying 20ml and enjoy your leisure activities with the security and confidence which Stormsure gives you.

DIRECTION:

  1. Mix a small amount of this accelerator with Stormsure Flexible Repair Adhesive and it will help reduce the cure time from 10-12 hours down to about 1-2 hours.
  2. Also, use it to thin the adhesive so it can be applied with a paint brush. For waterproofing stitched seams you should make the mixture with only 25% adhesive.
  3. The mixture will then wick its way into the tiny needle holes and cure inside the thread and blocking the hole.
  4. Some drysuit manufacturers use 3 layers.
  5. The first is very 85% accelerator, The second layer is 25% and the third layer is 5% accelerator.
  6. The combination should outlast the lift of the suit.
Colour No
SKU RP0052-SC
Manufacturer Stormsure

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Write Your Own Review

Only registered users can write reviews. Please, log in or register