11MM Deflate/Dump Valve

11MM Deflate/Dump Valve by FixMyKite is the perfect 'self-stick' replacement for leaking main deflate valves. This valve is commonly used as deflation on most kites and can be installed in under 5 minutes. 

Backed by Tear-Aid these valves are incredibly durable and will stick directly on to your kite bladder. Everything you need to install the new valve is included in the package, including an alcohol wipe and a link to detailed instructions.

FixMyKite is the global benchmark in 'Self-Stick' valves, trusted everyday by professional repairers around the world. When you buy a FixMyKite 'Self-Stick' valve you can be 100% confident you're receiving an original 11MM Deflate/Dump Valve backed by Tear-Aid and made by FixMyKite.

Mega-Patch (Optional)

Introducing the MEGA-PATCH with 77% more Tear-Aid!  Perfect for when you need to cut away your old valves or when you get a split in the bladder at the base of the existing valve.  The Mega-Patch eliminates the need to use an additional bladder patch before attaching your FixMyKite Self-Stick valve.  

HOW TO REPLACE:

1. Valve Removal: If replacing the valve, carefully peel off old valve. If old valve does peel off, cut around the circumference of the valve to remove
2. Cleaning: Wipe area where the valve will be placed with a provided alcohol swab. DRY COMPLETELY WITH A CLEAN PAPER TOWEL.
3. Peel and Stick: Lay bladder out flat. If possible, have a friend lightly hold bladder on a table or other smooth even surface. Peel off paper backing, center valve over hole, and place valve on bladder.
4. Press: Press valve from center outward to remove air bubbles and ensure proper adhesion and creases.

*Pro Tip - Use a hair dryer to heat the valve. This makes it easier to remove the valve. After placement of the self-stick valve use the hair dryer again to warm the adhesive. Press the valve from the center out massaging and stretching creating positive adhesion. Be careful not to overheat the bladder or new valve.