Duotone Straight One-Pump Valve
The FixMyKite Duotone Straight One Pump Valve is the perfect 'Self-Stick' replacement for leaking Duotone leading edge valves. This is the valve used on all Duotone 2018+ model kites and can be installed in under 5 minutes.
Free Shipping 99+
Free Shipping 99+
The FixMyKite Duotone Straight One Pump Valve is the perfect 'Self-Stick' replacement for leaking Duotone valves on leading edge bladders. This is the valve used on all Duotone 2018+ model kites and can be installed in under 5 minutes. Backed by Tear-Aid these valves are incredibly durable and will stick directly on to your leading edge bladder.
Our valves will stick on any Leading Edge Bladder material, in any colour! Everything you need to install the new valve is included in the package, including an alcohol wipe and a link to detailed instructions.
FixMyKite is the global benchmark in 'Self-Stick' valves, trusted every day by professional repairers around the world. When you buy a FixMyKite 'Self-Stick' valve you can be 100% confident you're receiving an original Duotone OEM valve backed by Tear-Aid and made by FixMyKite.
Introducing MEGA-PATCH with 77% more Tear-Aid! Perfect for when you need to cut away from your old valves or when you get a split in the bladder at the base of the existing valve. The Mega-Patch eliminates the need to use an additional bladder patch before attaching your FixMyKite Self-Stick valve.
HOW TO REPLACE:
- Valve Removal: If replacing the valve, carefully peel off old valve. If old valve does peel off, cut around the circumference of the valve to remove
- Cleaning: Wipe area where the valve will be placed with a provided alcohol swab. DRY COMPLETELY WITH A CLEAN PAPER TOWEL.
- Peel and Stick: Lay bladder out flat. If possible, have a friend lightly hold bladder on a table or other smooth even surface. Peel off paper backing, center valve over hole, and place valve on bladder.
- Press: Press valve from center outward to remove air bubbles and ensure proper adhesion and creases.
*Pro Tip - Use a hairdryer to heat the valve especially in cold weather. This makes it easier to remove the valve from the backing paper. After placement of the self-stick valve use the hairdryer again to warm the adhesive. Press the valve from the centre out, massaging and stretching creating positive adhesion. Be careful not to overheat the bladder or new valve. Following this method will guarantee your valve sticks in all conditions, and it really helps the Tear-Aid adhesive provide a permanent and lasting repair.
|Valve Style||One Pump|